SAM - Span is

a heat shrink polyester tissue without adhesive backing strong but light with a weight of 24g/m² or 0,55g/cm³ and has a thickness of 0,04mm

How to use Aeroplan SAM - Span

Sand the structure of your model carefully and remove any dust.

Using a small and soft brush, apply two to three coats of nitro-filler to all parts will come into contact with SAM - Span covering material, such as ribs, leading and trailing edges, spars, stringers etc.

Leave each coat to dry overnight and sand between coats carefully with 400-grit sandpaper.

Apply SAM - Span to your model and use thinner ( acetone will do in most cases ) to back down the covering material on the structure.

Use a heat gun or covering iron to remove any remaining wrinkles after the first coat has dried. Be careful; excessive heat may lead to discolouration of doped covering

Roll of 5 meters ( 1000mm width ) ..............................................................................................€ 17,50